Rigid stranding machine JLK630/1+6+12
(Separate motor driving and automatic loading system)
Technical sheet
Application: This machine is mainly used to produce large section and large length steel cored aluminum strand and aluminum alloy wire; It can also be used for pressing of copper round and aluminum sector conductor.
Overview of equipment composition
The whole machine is driven by separate motors driving. Each section of the cage and capstan is driven by a independent motor,. The control of the whole machine adopts Siemens S7-200 series PLC to ensure synchronization accuracy. In actual production, the operator can set the process parameters such as the pitch of each section of the stranding cage and the speed of the production line on the touch screen according to the cable specifications to be produced, and automatically calculate the speed of each transmission part and control the pay-off tension through PLC when starting up.
2.Main Parameter:
| 2.1 | Input wire diameter | Copper Ø 1.5－Ø 5.0mm | |
| Aluminum Ø 1.8－Ø 5.0mm | |||
| 2.2 | Max stranding OD | Ø 25mm | |
| 2.3 | Max rotation speed | 6 bobbins | 230r/min( |
| 12bobbins | 198r/min( | ||
| 2.4 | Stranding cage motor power | 6 bobbins | 75KW(AC) |
| 12 bobbins | 75KW(AC) | ||
| 2.5 | Stranding pitch(set one PLC) | Stepless adjustable | |
| 2.6 | Traction line speed | Max 61m/min | |
| 2.7 | Capstan motor power | 55KW（AC） | |
| 2.8 | Pay-off bobbin size in cage | PND630 | |
| 2.9 | Forceful dual wheel capstan | Ø 1600mm | |
| 2.10 | Central pay-off bobbin size | PND500-PN630 | |
| 2.11 | Take-up bobbin reel size | PN800-PN1600 | |
| 2.12 | Machine center high | 1000mm | |
